The unapologetically overbuilt solution for discreetly transporting/staging your Vang Comp shotgun.
Designed to blend in with your other outdoor activity gear so as not to raise any red flags.
This heavy-duty padded case has a waterproof, tear-resistant bottom panel that can handle being set on everything from wet grass to rough gravel without hurting the muzzle of the firearm inside.
Made in USA – exclusively for Vang Comp by TUFF Products
The first run of bags will have an “Edition 1” tag sewn inside the closure.
Receiver-mounted optics and pistol grip stocks can be a bit tight, depending on overall length, but have been tested to fit nicely without printing too obviously.
Since the interior is untreated Cordura and may “wick” away any protective oil from your metal surfaces, it is not recommended to keep the firearm stored in this case for permanent storage without regular applications of protective oils to those metal surfaces.
*No chair is included.
**No shotgun is included.
**Don’t use your shotgun as a chair.
*NOTE* If youโre in between sizes, go to the smaller size. About 4 inches of material at the top of the bag makes up the cinch โclosureโ, so if youโre going muzzle first, the recoil pad will just poke past the padding but still be inside the bag.
*NOTE* If youโre in between sizes, go to the smaller size. About 4 inches of material at the top of the bag makes up the cinch โclosureโ, so if youโre going muzzle first, the recoil pad will just poke past the padding but still be inside the bag.
*No chair is included. **No shotgun is included. **Don’t use your shotgun as a chair.
Weight
20 oz
Dimensions
24 × 12 × 6 in
Color
Red, Silver, Navy Blue, Green, Black
Length (interior)
42-inch (fits most shotguns with 20-inch barrels), 38-inch (fits most shotguns with 18-inch barrels), 33-inch (fits most shotguns with 14-inch barrels)
2 reviews for VCS CHAIR COVER – DISCREET CARRY BAG
Rated 4 out of 5
Stephen Crews (verified owner)–
I canโt even count how many times Iโve been faced with the conundrum of how to hide a long gun in my wifeโs mini van when we go on family vacations. I have an 870 SBS with a mag tube length barrel, so itโs a bit long (and also a bit longer than cheap folding chair bags.). Likely a non issue for the vast majority of end users. Anyhow, I ended up
cutting some 5×5 foam blocks to take up the extra length. Itโs also puffing the bag out and holding the intended square shape, which it wasnโt doing as shipped. This is a great USA made product at a very reasonable price point. My only two continuous improvement suggestions would be single drawstring for opening? and more options for length. 10/10 would buy again.
Rated 5 out of 5
Thad Gibson (verified owner)–
Ingenious idea to transport your shotgun. Very well built. I cut a 5″x5″ square of open cell packing foam in the bottom to protect the inside material from tearing when the muzzle of my Rem.870 is inserted. I have the screw-in door breech attachment installed. I also made some leather straps used for bedrolls as a method to sling over your shoulder. I agonized over what style of case to purchase for my shotguns, and I think I made a good choice. I should note that the attachment of your white light,and holosun green dot fit well with no issues. I would not hesitate to purchase again,especially at the $75 price point.
Stephen Crews (verified owner) –
I canโt even count how many times Iโve been faced with the conundrum of how to hide a long gun in my wifeโs mini van when we go on family vacations. I have an 870 SBS with a mag tube length barrel, so itโs a bit long (and also a bit longer than cheap folding chair bags.). Likely a non issue for the vast majority of end users. Anyhow, I ended up
cutting some 5×5 foam blocks to take up the extra length. Itโs also puffing the bag out and holding the intended square shape, which it wasnโt doing as shipped. This is a great USA made product at a very reasonable price point. My only two continuous improvement suggestions would be single drawstring for opening? and more options for length. 10/10 would buy again.
Thad Gibson (verified owner) –
Ingenious idea to transport your shotgun. Very well built. I cut a 5″x5″ square of open cell packing foam in the bottom to protect the inside material from tearing when the muzzle of my Rem.870 is inserted. I have the screw-in door breech attachment installed. I also made some leather straps used for bedrolls as a method to sling over your shoulder. I agonized over what style of case to purchase for my shotguns, and I think I made a good choice. I should note that the attachment of your white light,and holosun green dot fit well with no issues. I would not hesitate to purchase again,especially at the $75 price point.