VCS Rear Sight with RMR Mount for Remington Factory Holes
$220.00
Add a click-adjustable, wing-protected, ghost ring rear sight with integral co-witness RMR-pattern red dot mount to your factory-drilled and tapped shotgun receiver.
The Vang Comp Rear Sight with RMR Mount, using the factory-supplied holes.
- The most durable and versatile combo rear sight/optic mount for factory Remington hole patterns.
- Allows co-witness with factory-installed Ghost Ring Front Sights (Vang Comp, Scattergun Technologies/ Wilson Combat, XS Sights, MMC). 1/2″ to 3/4″ Front Sight height-over-bore is ideal for a functioning co-witness.
- Compatible with any optic that is designed to mount to a Trijicon RMR footprint, including but not limited to: Trijicon RMR/RCR/SRO, /Holosun 407c/507c/508t,
- Made in the USA
- Billet 6061-T6 aluminum
- MIL-A-8625 anodize
- (2) Receiver Mount and (6) Optic Mount Screws included
- Weight: 1.7 oz.
NOTE: The fasteners provided are intended for use on a pump-action shotgun. Installing this optic mount with the supplied receiver mount screws onto a semi-auto shotgun may cause damage to the barrel. Recommend professional gunsmith installation.
Obviously, no optic is included in this purchase, just the Rear Sight/RMR combo Mount.
**Be aware that this is made for Remington factory holes, NOT the Vang Comp hole pattern for our Rear Sight with Rail (VC-103). We’re working on a drop-in solution for folks with our VC-103 currently, but this VC-143 is not it.
Out of stock
Want to be notified when this product is back in stock?
Vang Comp Systems has been installing red dot optics on shotguns for over 20 years.
We have seen the trends of “co-witness” and “Quick Detach” cycle in and out of fashion. Both have their merits.
Red dot optics have come a long way in the last 20 years and now they are widely considered to be as durable, if not more so, than iron sights.
Red dot sights are no longer the future, they are the now.
This new combination Rear Sight with direct optic mount attaches to the shotgun using the drilled and tapped holes provided by the factory.
It eliminates the height of both the Picatinny rail on the receiver and the optic’s Picatinny mount. The lower overall mounting height keeps the optic closer to the barrel (height-over-bore) providing for a lower-profile install and a more natural cheek weld when sighting.
Most of the people who have sighted shotguns with this optic mount installed do not require cheek risers to achieve a natural point of aim.
The proven Wing Protected rear sight design has been a staple on Vang Comp builds ever since we grew tired of waiting on a certain Italian sight manufacturer to import sights at the pace we needed. So we made our improvements and changes and had them made in the USA.
The click-adjustable rear sight offers gradual, repeatable, 1/4MOA per click adjustments for both windage and elevation.
| Weight | 1.760 oz |
|---|
Related products
-
-
Select options This product has multiple variants. The options may be chosen on the product page PartsVCS STAINLESS STEEL MAGAZINE FOLLOWER
$20.00 -
Reviews
There are no reviews yet.