The ol’ reliable Vang Comp Stainless Steel Magazine Follower. These are turned from a solid piece of USA stainless steel bar stock for corrosion resistance and a lifetime of service.
No need for high-visibility colors with the Vang Comp follower, check magazine status just by putting your finger in the tube; feel a flat? You’ve got a shell in there. Feel that hole in the front of our follower? Your mag tube is empty, time to reload. And you didn’t need to take your eyes off the threat to check.
This multitasking replacement for your factory-installed magazine follower not only travels smoother in your magazine tube due to it’s reduced bearing surface but it actually collects dirt and debris from the inside of your magazine making it easier to clean the magazine tube.

**Please let us know if you need a “slotted” follower for your 20 gauge. All current 12 gauge followers are slotted.**

SKU: N/A Category:
Weight N/A

12 Gauge, 20 Gauge


  1. Christopher Whatley

    Best feature: ability to tell if magazine is loaded by feel.

  2. Gerry

    Great product. Using this in conjuction with the +2 and +3 in my 2 870’s. I was lucky enough to have the old 870’s without the indents.

  3. James (verified owner)

    Works awesome in my Mossberg 500 12 ga. No binding etc like stock follower.

  4. Tracey Alexander (verified owner)

    First of all, this is one of the best followers you can get. It is stainless steel, which will not corrode and damage your magazine tube. The weight feels good too. The only thing I would suggest is to sand down the edges a little with a Scotchbrite pad. You know when you’ve got it just right when it starts to look like a pocket-worn key.

Add a review

Your email address will not be published. Required fields are marked *

Scroll to Top